NETPIX® 4800

Eyevis

netpix 4800 is a network based graphic controller for the management of large screen displays or single projectors

Through its MultiScreen-ability any display surfaces can be realized. The controller creates a big joined desktop for network-applications, video and graphic sources. At the heart of the NPX 4800 works the most powerful INTEL® XEON® QUAD CORE CPU architecture of any display processor in its class. The new NPX 4800 Controller offers an ultra high performance bus, 64Bit technology and high bandwidth trough a PCIexpress BUS with 100GB/s. These new technologies guarantee the revolutionary and powerful performance of the next generation of the NPX Family in any control room application.

Send inquiry

Back

The NPX 4800 provides multiple analog and digital video and graphic connectivity with input cards. Through the new Switch Fabric architecture, video and graphic sources can be displayed simultaneously on the display wall in full frame rates. All analog and digital Video-/RGB-/DVI- and IP Streaming data is transmitted with up to 100GByte/s without any dependencies on the system

Advantages of the New NPX4800 Series

) Cost efficient controller solution for large screen systems
) Less power consumption
) Simple system architecture
) Expandable for future system upgrades
) Higher performance
) Even more flexible than previous netpix versions
) Almost no restrictions
) Reduced noise level

System Architecture

The new NPX Controllers from the 4800 Series are based on the new Intel® XEON® Quad Core Technology CPUs. This new CPU generation provides better performance for the display of high-end visualisation applications compared to other systems. ) QUAD CORE Intel Xeon Processor with up to 3.3 GHz (optional up to 12 cores)
) High-end server components for highest availability
) PCI-Express X8 Bus up to 2GB/s
) 4GB DDR3 ECC RAM (expandable up to 32GB)
) DUAL Gigabit Ethernet

System Availability

) Redundant power supply units, hot swappable (optional)
) Redundant SATA hard drives with RAID1, hot swappable (optional)
) Disk Imaging and Disaster Recovery, in the event of a system or disk crash, security attack or other fatal failure you can restore your entire controller within minutes - no reinstallation is required.
) The NPX 4800 is built in accordance with eyevis ISO 9001 registered facility to meet the specific requirements of each customer and is the best controller for standard control rooms with high availability.

Desktop Management & Operating system

) Because of its MultiScreen-ability, any data and application can be displayed simultaneously; they can also be positioned and resized freely. The operator has a big desktop with a very high resolution at his disposal, which will be multiplied by the size of the wall.
) Windows® XP PRO 32/64 BIT and WIN2003+2008 Server support as well Windows 7 32/64Bit
) Up to 32GB RAM inside the systems reserved for RAM intensive applications
) Huge Windows desktop with up to 32000x32000 pixel depending on the size of the system
) Standard Windows® & X11 applications and SCADA software can be displayed on the wall with no restriction.
) Windows®-based applications can be displayed simultaneously with any other input signals like video and RGB/DVI.

Bus System

The core of the system is the ultra-fast PCIe Switch Fabric with PCIe X8 slots and a total bandwidth of 100GB/s for transmitting Windows® information, network data, video, digital streams and graphic signals to each output card. This guarantees a very high bandwidth without decreasing frame rates when numerous inputs are displayed simultaneously

Input Signal Processing

The NPX4800 controller can be equipped with various input cards for video and graphic integration. Analog/digital video and RGB windows can be moved, scaled and placed freely on the display wall.
) The input cards provide state-of-the-art video processing resulting in superb quality
) Huge number of cards per system possible
) Easy to upgrade for future system expansion

Analog Video Input Board
) Up to 128 video signals in one system
) Up to 32 video windows can be displayed with every display output
) Composite BNC or S-Video (Y/C)

IP Decoder Board
) Up to 128 IP video signals in one system
) Simultaneous decoding of up to 8 channels in D1 resolution per IP-decoder board
) Simultaneous decoding of up to 4 channels in FullHD resolution per IP-decoder board
) Supports MPEG2, MPEG4, H264, MJPEG

RGB / DVI Inputs
) Display of the source output in freely moveable, scalable and placeable windows on the display wall
) Up to 40 RGB/DVI input sources
) Input Signals: - DVI Single Link up to 1920x1200
- DVI Dual Link up to 2560x1600
- Analog up to 2048x1536

SDI Inputs
) Display of the source output in freely moveable, scalable and placeable windows on the display wall
) Up to 20 SDI inputs
) Video Modes: SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p) & 2k digital cinema modes

Output Graphics Processing

The new 128Bit GPU has 128MB per output channel achieves a never seen graphic performance.
) Analog and digital outputs up to 1920x1200 pixels and HD Format
) Configurations up to 36 Output channels (up to 80 Output channels on request*)
) Multiple resolution modes for different output resolutions at the same time, for rectangle or non-rectangle display configurations (non-standard modes, available on request)
) Live preview support for each source connected with the eyecon wall management software
) Underlapping mode for narrow bezel displays
) Overlapping mode for edge overlapping projections
) Pivot mode for landscape and portrait display*

Wall Management Software

For an easy management of large screen displays, we recommend to combine the eyecon wall management software with the netpix controller. With this software, especially developed for large screen displays, the user has nearly unlimited possibilities for the management and operation of his display wall.

NPX4800-CPU (Art. No. 13981)
Processor:	Up to two Intel® 64-bit XEON® processors Quad Core Intel® Xeon® Processor E5606 with 2.13 GHz (optional up to 12 cores with 3.3 GHz)
Chipset:	Dual Intel® 5520 (Tylersburg) Chipsets
RAM:	4GB DDR3 ECC RAM (expandable up to 32GB)
Expansion Slots:	7 x PCIexpress X8
Hard Disc:	SATA 3.0Gbps, HotSwap 120GB SSD, (optionally: 120 GB, RAID1 HotSwap, optionally expandable up to 1 TB)
Disc Drive:	Read: DVD: 16x / CD: 48x max Write: DVD-R: 24x / DVD+R: 24x / DVD-RW: 6x / DVD+RW: 8x / DVD-R DL: 12x / DVD+R9: 12x / CD-R: 48x / CD-RW: 32x
Ethernet:	2 x 10/100/1000 Mbps RJ45 Ports integrated
Accesssories:	104-key keyboard; mouse with 2-buttons + wheel/button, optional: extension up to 50m; DVI cables for eyevis Cubes (Fibre optic) for distances up to 100m
Dimensions (WxHxD):	42.35 cm x 17.7 cm x 67.0 cm
Weight:	26.5 kg
Operating Conditions:	Temperature: 0°C – 40°C (32°F – 104°F) / Humidity: 10 – 90% not condensing / Altitude: up to 3,048 m (10,000 ft)
Power Supply:	100-240 V, 50-60Hz, 800 Watt, optional: redundant, HotSwap
Hardware Expansion NPX4800-EXP (Art. No. 14005)
Expansion Slots:	9 x PCIexpress X8 Slots (up to 32 slots with additional expansions)
BUS:	Switch Fabric with a maximum bandwidth of 100GB/s
Dimensions (WxHxD):	43.0 cm x 17.7 cm x 52.3 cm
Weight:	26.5 kg
Operating Conditions:	Temperature: 0°C – 40°C (32°F – 104°F) / Humidity: 10 – 90% not condensing / Altitude: up to 3,048 m (10,000 ft)
Power Supply:	100-240 V, 50-60Hz, redundant, HotSwap 620 Watt
Graphic Board NPX4800-GB4 (Art. No. 13986)
Graphic Memory:	512MB per board
Wall Configuration:	Any rectangular or non-rectangular array up to 36 display modules
Resolution:	640x480 up to 1920x1200 and HDTV 1080p per Output
Colour Depth:	16/32 Bit
Output Signal:	DVI-I Connector (analog and digital, including DVI-I-to-HD15 adapter)
Video Input Card NP4800-VID8 (Art. No. 13983)
Inputs:	8 x Composite or S-Video BNC Connectors
Input format:	NTSC, PAL, SECAM
Decoder:	High-Quality Video Decoder with De-interlacing
Scaling & Display:	Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast.
DVI Input Card NPX4800-DVI2 (Art. No. 16373)
Inputs:	2 x DVI-I / HD15
Signal Processing:	RGB/DVI with full Refresh; integrated Scaler
Format:	RGB with separate Syncs for H and V, DVI-I
Resolution:	Up to 1920x1200 Pixels
Pixel Format:	16Bit/32Bit, YUV422, RGB 8:8:8
Scaling & Display:	Display of multiple sources of any size, everywhere on the video wall
DVI Input Card NPX4800-DDVI1 (Art. No. 16329)
Inputs:	1 x DVI-I Dual Link / HD15
Signal Processing:	RGB/DVI with full Refresh; integrated Scaler
Format:	RGB with separate Syncs for H and V, DVI-I
Resolution:	Up to 2560x1600 Pixels
Pixel Format:	16Bit/32Bit, YUV422, RGB 8:8:8
Scaling & Display:	Display of multiple sources of any size, everywhere on the video wall
Video Input Card NPX4800-SDI2 (Art. No. 16242)
Inputs:	2 x SDI BNC Connectors with Loop-Through Capability
Video Modes:	SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p), 2k Digital Cinema Mode
Pixel format:	RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/ 32bit) pixels
Maximum SDI bit rate:	64MB per channel (total 128M)
Scaling & Display:	Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast
IP Decoding Card NPX4800-IPD8 (Art. No. 14148)
Decoders:	8x D1 Decoder or 2x HD 1080p Decoder
LAN:	10/100/1000 Mbps RJ45 Ports integrated
Format:	H264, MPEG2, MPEG4, MJPEG
Resolution:	Up to D1, 720p, 1080p, Megapixels
Frame rates:	25/30 Frames per channel
Dimensions (WxHxD):	44.5 x 4.4 x 26.4 cm (incl. rack handles)
Weight:	4.05 kg

NPX-4800 Data Sheet (0.78 MB)