EY-M1-100-XX
Optical Extension Cable (Fixed Type)
This unique fibre optical cable system let your digital monitor extend up to 300 meter (984 feet) away from host without any external power supply based on DVI standard.
Send inquiry
Characteristics
) Detail Drawing eyevis Accessories
) DVI TrAnsmIssIon sysTems
) High Speed and long distance transmission by optical system
) Fully compatible with DVI standard by DDWG
) Use of standard DVI-D Plug
) Either external or internal power supply is possible. (External power supply is optional. Automatic power switch is included.)
) R,G,B,Clock signal is transmitted by optical fibre
) DDC signal and 5V power line is transmitted by copper line
) Optional fibre-only system without DDC function (pseudo DDC signal can be transmitted for EDID information.)
) No EMI characteristics for medical instruments and airplane
) Standard lengths: 10m, 20m, 30m, 50m and 100m, customised lengths up to 300m available on request !!!
Features | |
---|---|
Frequency Bandwidth | 1,6 Gbps (single link) |
Supporting Graphic Resolution & Distance |
Type A: WUXGA (1920 x 1200) 60Hz -> 100 m (330 ft) Type B: WUXGA (1920 x 1200) 60Hz -> 300 m (984 ft) [no DCC function] |
Using Connector | DVI Digital 24pin plug |
Minimum Power Requirement from Computer | 5V (0,5 A) |
Optical | |
Optical Source | 850 nm VCSEL |
O/E Converter | PIN Photo Diode |
Using Fibre | Multi-mode optical fibre |
Environmental | |
Operating Temperature Range | 0 – 50 °C |
Storage Temperature Range | -20 – 70 °C |