C2-2255A
Video Scaler PLUS
This scaler has all the functions and features of the C2-2200 and adds a wide variety of additional capabilities, such as Picture-In-Picture, Chromakey, Lumakey and Mixing. The Key Mode allows computer graphics to be keyed over an external Composite or S-Video signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits glitch-free mixing between the computer image and external video. The PIP Mode allows the video inputs to be inset in a window over a computer or HD input. C2-2255A provides an SDI input as well.
Our exclusive AutoSet® feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. All settings are stored in non-volatile memory and are retained even when power is switched off. Optional rackmount kits are available for all C2-2000 models.
Price excl. VAT: 1.805,00 €
Price with VAT: 2.202,10 €
Variable Zoom
10X enlarges any part of the computer screen to fill the entire video screen and position controls allow movement to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colors. Motion compensation, diagonal interpolation and a 3:2 Pulldown feature for NTSC significantly improve the image quality. Temporal interpolation greatly improves frame rate conversion by analyzing and merging successive frames. Pixel Level Motion Adaptive Diagonal Interpolation insures high quality de-interlacing of PAL and NTSC signals.
Key Features
- Automatic incoming resolution detection
- Analog Computer Input via HD-15 Connector
- DVI-D Computer Input via DVI-I Connector
- Inputs: 2x CV, 2x YC, 1x YUV/YPbPr Component
- 1x SDI Input (C2-2205)
- Scaling of the RGB or YPbPr input signal
- Computer Resolutions to 2048x2048
- HDTV Resolutions to 1080p
- AutoSet® - Automatic picture sizing
- Multiple Worldwide Television Standards
- 2x Outputs (RGB or YPbPr) – DVI-D & Analog
- Integral 4x1 Stereo Audio Routing Switcher
- RS-232 & IP Interface and Windows Control Panel
- IR Remote Control
- Variable Image Zoom to 10X and Shrink to 10%
- Optional Single/Dual Rackmount Kit
- Optional Input Expansion for additional inputs
- Picture-in-Picture
- Chromakey and Lumakey
- Edge Blending
- SDI Input
Input Expansion
Possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.
Basic Stereo Audio switching
Provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.
Advanced Stereo Audio
Available via the optional S2-106AD Input Expansion Switcher, providing six differential audio inputs, which can be used for low impedance balanced or high impedance unbalanced sources. The user controls audio level, audio sampling frequencies and up to 999ms of adjustable audio delay independently for each input. The unit has numerous choices for audio I/O connectors, including a terminal block. The S2-106AD connects to the C2 unit via the OPTIONS interconnect cable and is then fully integrated into the control system of the host unit.
Video Inputs | |
---|---|
Television Standards | NTSC, PAL, PAL-M, PAL-N, SECAM |
Composite Video | 2x via BNC |
S-Video (YC) | 2x via 4-Pin Mini-DIN Connector |
YUV/YPbPr | 1x via 3-BNC |
SDI (SMPTE 259M) | 1x via BNC |
Computer Inputs | |
Signal Type | 1x Analog via HD-15F w/Loop-thru |
1xDVI-D via DVI-I Connector | |
Format | RGBHV, RGBS,RGsB, YPbPr |
Sync | TTL Level, 10KΩ, Pos or Neg |
Termination | Auto-terminating into 75Ω |
R-G-B Level Range | 0.5-2.0 Vp-p |
Scan Rate Detection | Automatic |
PC Resolutions | Any up to 2048x2048 |
HDTV Resolutions | Any up to 1080p |
Vertical Refresh Rate | Any to 250Hz |
Max Horiz Scan Rate | 150KHz |
Computer Compatibility | PC, Macintosh, Workstations |
Computer Outputs | |
Signal Type | 1x Analog via HD-15F w/Loop-thru |
1xDVI-D via DVI-I Connector | |
Format | RGBHV, RGBS,RGsB, YPbPr |
R-G-B Level Range | 1.0 Vp-p |
PC Resolutions | Any up to 2048x2048 |
HDTV Resolutions | Any up to 1080p |
Vertical Refresh Rate | Any to 250Hz |
General | |
Size & Position | AutoSet or Manual |
Image Size | User-Definable Presets |
Image Freeze | One Video Frame |
Settings Memory | Non-Volatile |
Zoom Range | Variable to 10X Zoom |
Shrink Range | Variable to 10% |
Image Mirroring | Horizontal and/or Vertical |
Horizontal Filtering | Full Digital |
Conversion Technology | Proprietary – CORIO2™ |
Color Resolution | 24-bit (16.8 Million Colors) |
Digital Sampling | 24-bit, 4:4:4 format |
Firmware Memory | Flash, Upgradeable via RS-232 |
Video Decoder | 9-bit Digital |
De-Interlacing (NTSC-PAL) | Pixel-level Motion Adaptive |
Comb Filter Decoding | Adaptive |
Film Mode (NTSC) | 3:2 Pulldown |
Video Adjustments | Contrast, Brightness, Saturation, Hue(NTSC), R-G-B Levels |
Audio Input/Output | |
Inputs | 4x Unbalanced via Terminals |
Outputs | Unbalanced via Terminals |
Operational Modes | |
Key | Chromakey or Lumakey |
Mix | PC to/from Video |
PIP | Variable Window Size & Position |
Control Methods | |
Local | via Front Panel Buttons & OSD |
RS-232 Interface | via D9 Female Connector |
IP Interface | via RJ45 |
Infrared Remote | via IRC-5 Remote Unit |
Input Expansion Control | via D-15 Options Connector |
Warranty | |
Limited Warranty | 2 Years Parts and Labor |
Regulatory Approvals | |
Main Units | FCC, CE, RoHS |
Power Supplies | UL, CE, CSA, RoHS |
Mechanical | |
Desktop Case (H-W-D) | 41.5x218x150mm |
Weight (Net) | 1.2 kg |
Environmental | |
Operating Temperature | +4° to +45° C |
Operating Humidity | 10% to 85%, Non-condensing |
Power Requirement | |
External Power Supply | 12VDC@1A |
Accessories Included | |
1x C-Video Cable | 2m BNC to BNC |
1x VGA Cable | 2m HD15 Male to Male |
1x DVI Cable | 2m DVI Male to Male |
1x Serial Cable | 2m D9 Male to Male |
1x IR Remote | IRC-5 |
1x Operations Manual | C2-2000 Series |
1x In-Plug Power Supply | US, UK or Euro |
Optional Accessories | |
RM-220 | Single/Dual Rackmount Kit |
S2 Series | Input Expansion Switcher |