EXT-HDMI1.3-CAT6-8X
Osemkratni ekstender CAT6 za HDMI - spremljevalni izdelek za matrike
Gefnov osemkratni ekstender CAT6 za HDMI je spremljevalni izdelek za vsako Gefnovo 8X8 HDMI matriko. HDMI vire, ki jih usmerja matrika, razširi do 60 m do največ osmih HDTV zaslonov. Funkciji za nadzor in priročnost vključujeta nadzor prek IP-ja, RS-232 in IR-ja, kot tudi IR releja za nadzor izvornih komponent.Gefnov osemkratni ekstender CAT6 za HDMI podpira vse funkcije HDMI 1.3, vključno z možnostmi Deep Color, Lip Sync, 3DTV in formati zvoka brez izgube, kot sta Dolby TrueHD in DTS Master Audio. Tehnologija digitalnega prenosa osemkratnega ekstenderja CAT6 zagotavlja 100-odstotno integriteto signala do 60 m prek enega kabla CAT-6A.
Cena brez DDV: 4.989,00 €
Cena z DDV: 6.086,58 €
How It Works
The Gefen 8x CAT6 Extender for HDMI system consists of one Sender unit and eight Receiver units. Up to eight HDMI sources can be connected to the Sender unit with the included one foot HDMI cables. A single CAT-6A cable of up to 200 feet (60 meters) connects the Sender and Receiver units. Each Receiver unit is connected by a HDMI cable to a HDTV Display. The Sender is powered using a 24V DC power supply and each Receiver is powered by its own 5V DC power supply.
The product can be used as an add-on HDMI extender for any Gefen 8X8 HDMI matrix, or as a stand-alone extender for extending HDMI signals up to 200 feet (60 meters) to as many as eight HDTV displays. Both configurations allow for IR signals to be relayed from the display location back to the source components over the single CAT-6A cable.
An optional IR remote control can be used at the sender to control the routing or at each receiver to control each individual zone. Additional control is possible via any HTTP-Compliant Web Browser (IP Control) or by using RS232 control. The sender unit also has a unique feature that can apply control to the IP control and RS232 control of the 8x8 HDMI 1.3 matrixes: simply connect the supplied RS232 cable to the matrix's RS232 input and the 8x CAT6 Extender for the HDMI sender unit's RS232 output.
Note: HDMI 1.3 Features Supported:
-
Dolby TrueHD & DTS-HD Master Audio
-
Deep Color Supported (x.v.Color)
-
225 MHz (up to 12 bit YUV 444 @ 1080p)
-
Lip-Sync Pass-Through
-
3DTV
This product is an HDCP pass-through device.
Package Includes:
-
(1) 8x CAT6 Extender for HDMI Sender unit
-
(8) 8x CAT6 Extender for HDMI Receiver unit
-
(8) HDMI cable (1-foot, M-M)
-
(1) RS-232 Serial Cable (M-F)
-
(1) 24V DC Power Supply
-
(8) 5V DC Locking Power Supply
-
(1) Set Of Rack Ears (Sender Unit Only)
-
(1) User's Manual
Optional Accessories:
Features |
---|
Extends eight HDMI sources up to 200 feet (60 meters) using one CAT-6A cable per display |
Supports resolutions up to 1080p Full HD and 1920 X 1200 |
Supports LPCM 7.1 Audio, Dolby Digital Plus, Dolby TrueHD and DTS Master Audio |
RS-232 serial port extension for automation and matrix control from any receiver location |
IR extension and matrix control from any receiver |
Adds IP Control for the connected matrix |
May also be used to replace eight stand-alone HDMI extenders |
HDCP Compliant |
3DTV, Lip Sync and CEC Pass-through |
Rack-mountable (Sender Only) |
Specifications |
Maximum Pixel Clock: 225 MHz |
Video Input Connectors (Sender): (8) HDMI Type A 19-pin female |
Video Output Connector (Each Receiver): (1) HDMI Type A 19-pin female |
Link Connectors (Sender): (8) RJ-45, Shielded |
Link Connectors (Each Receiver): (1) RJ-45, Shielded |
RS-232 Port (Sender): (1) DB-9, male (to connect to Matrix) |
RS-232 Port (Sender/Each Receiver): (1) DB-9, female |
Ethernet Port (Sender): (1) RJ-45, Shielded |
IR Extender Port (Sender/Receiver): (1) 3.5mm mini-stereo jack |
IR Emitter Ports (Sender): (8) 3.5mm mini-mono jacks |
Power Supply: 24V DC (Sender), 5V DC (Receiver) |
Power Consumption: 60W max. (Sender), 10W max. (Each Receiver) |
Sender Dimensions: 17.0" W x 4.5" D x 3.5" H (1U rack height with supplied rack ears) |
Receiver Dimensions: 7.5" W x 3.5" D x 1.3" H |
Shipping Weight: 25 lbs. |