Vsi produkti


Reference


C2-2250A

TvOne

Variable Zoom

10X enlarges any part of the computer screen to fill the entire video screen and position controls allow movement to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colors. Motion compensation, diagonal interpolation and a 3:2 Pulldown feature for NTSC significantly improve the image quality. Temporal interpolation greatly improves frame rate conversion by analyzing and merging successive frames. Pixel Level Motion Adaptive Diagonal Interpolation insures high quality de-interlacing of PAL and NTSC signals.

Key Features

  • Automatic incoming resolution detection
  • Analog Computer Input via HD-15 Connector
  • DVI-D Computer Input via DVI-I Connector
  • Inputs: 2x CV, 2x YC, 1x YUV/YPbPr Component
  • 1x SDI Input (C2-2205)
  • Scaling of the RGB or YPbPr input signal
  • Computer Resolutions to 2048x2048
  • HDTV Resolutions to 1080p
  • AutoSet® - Automatic picture sizing
  • Multiple Worldwide Television Standards
  • 2x Outputs (RGB or YPbPr) – DVI-D & Analog
  • Integral 4x1 Stereo Audio Routing Switcher
  • RS-232 & IP Interface and Windows Control Panel
  • IR Remote Control
  • Variable Image Zoom to 10X and Shrink to 10%
  • Optional Single/Dual Rackmount Kit
  • Optional Input Expansion for additional inputs
  • Picture-in-Picture
  • Chromakey and Lumakey
  • Edge Blending

Input Expansion

Possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.

Basic Stereo Audio switching

Provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.

Advanced Stereo Audio

Available via the optional S2-106AD Input Expansion Switcher, providing six differential audio inputs, which can be used for low impedance balanced or high impedance unbalanced sources. The user controls audio level, audio sampling frequencies and up to 999ms of adjustable audio delay independently for each input. The unit has numerous choices for audio I/O connectors, including a terminal block. The S2-106AD connects to the C2 unit via the OPTIONS interconnect cable and is then fully integrated into the control system of the host unit.

Video Inputs
Television Standards NTSC, PAL, PAL-M, PAL-N, SECAM
Composite Video 2x via BNC
S-Video (YC) 2x via 4-Pin Mini-DIN Connector
YUV/YPbPr 1x via 3-BNC
Computer Inputs
Signal Type 1x Analog via HD-15F w/Loop-thru
1xDVI-D via DVI-I Connector
Format RGBHV, RGBS,RGsB, YPbPr
Sync TTL Level, 10KΩ, Pos or Neg
Termination Auto-terminating into 75Ω
R-G-B Level Range 0.5-2.0 Vp-p
Scan Rate Detection Automatic
PC Resolutions Any up to 2048x2048
HDTV Resolutions Any up to 1080p
Vertical Refresh Rate Any to 250Hz
Max Horiz Scan Rate 150KHz
Computer Compatibility PC, Macintosh, Workstations
Computer Outputs
Signal Type 1x Analog via HD-15F w/Loop-thru
1xDVI-D via DVI-I Connector
Format RGBHV, RGBS,RGsB, YPbPr
R-G-B Level Range 1.0 Vp-p
PC Resolutions Any up to 2048x2048
HDTV Resolutions Any up to 1080p
Vertical Refresh Rate Any to 250Hz
General
Size & Position AutoSet or Manual
Image Size User-Definable Presets
Image Freeze One Video Frame
Settings Memory Non-Volatile
Zoom Range Variable to 10X Zoom
Shrink Range Variable to 10%
Image Mirroring Horizontal and/or Vertical
Horizontal Filtering Full Digital
Conversion Technology Proprietary – CORIO2™
Color Resolution 24-bit (16.8 Million Colors)
Digital Sampling 24-bit, 4:4:4 format
Firmware Memory Flash, Upgradeable via RS-232
Video Decoder 9-bit Digital
De-Interlacing (NTSC-PAL) Pixel-level Motion Adaptive
Comb Filter Decoding Adaptive
Film Mode (NTSC) 3:2 Pulldown
Video Adjustments Contrast, Brightness, Saturation, Hue(NTSC), R-G-B Levels
Audio Input/Output
Inputs 4x Unbalanced via Terminals
Outputs Unbalanced via Terminals
Operational Modes
Key Chromakey or Lumakey
Mix PC to/from Video
PIP Variable Window Size & Position
Control Methods
Local via Front Panel Buttons & OSD
RS-232 Interface via D9 Female Connector
IP Interface via RJ45
Infrared Remote via IRC-5 Remote Unit
Input Expansion Control via D-15 Options Connector
Warranty
Limited Warranty 2 Years Parts and Labor
Regulatory Approvals
Main Units FCC, CE, RoHS
Power Supplies UL, CE, CSA, RoHS
Mechanical
Desktop Case (H-W-D) 41.5x218x150mm
Weight (Net) 1.2 kg
Environmental
Operating Temperature +4° to +45° C
Operating Humidity 10% to 85%, Non-condensing
Power Requirement
External Power Supply 12VDC@1A
Accessories Included
1x C-Video Cable 2m BNC to BNC
1x VGA Cable 2m HD15 Male to Male
1x DVI Cable 2m DVI Male to Male
1x Serial Cable 2m D9 Male to Male
1x IR Remote IRC-5
1x Operations Manual C2-2000 Series
1x In-Plug Power Supply US, UK or Euro
Optional Accessories
RM-220 Single/Dual Rackmount Kit
S2 Series Input Expansion Switcher