netPIX 4800-LC
netpix 4800-LC - entry-level controller for small and medium-sized control rooms
netpix 4800 is a network based graphic controller for the management of video wall systems, single displays or projectors. Through its MultiScreen-ability any display surfaces can be realized. The controller creates a big joined desktop for network-applications, video and graphic sources. At the heart of the NPX 4800 works the cost-effective, but powerful SBC in combination with the backplane with switch fabric The new NPX 4800 Controller offers an ultra high performance bus, cost-effective INTEL® CoreTM CPUs, 64Bit technology and high bandwidth trough a Switch Fabric BUS with 192GB/s. These new technologies guarantee the revolutionary and powerful performance of the next generation of the NPX Family in any control room application.
Pošlji povpraševanje
The NPX 4800 provides multiple analog and digital video and graphic connectivity with input cards. Through the new Switch Fabric architecture, video and graphic sources can be displayed simultaneously on the display wall in full frame rates. All analog and digital Video-/RGB-/DVI- and IP Streaming data is transmitted with up to 192GByte/s without any dependencies on the system.
Advantages of the new NPX4800-LC series
Cost-efficient entry-level display wall processor
Reduced height and depth of installation
Simple system architecture
System architecture
The NPX4800-LC controller relies on new SBC (Single Board Computer) technology. This technology is based on the new Intel® CoreTM Duo Core Technology. Compared to other systems, this CPU generation provides a favorably priced start for the high-quality presentation of applications.
Intel® CoreTM Processor with up to 3,30 GHz
High-end server components for highest availability
8GB DDR3 RAM
DUAL Gigabit Ethernet
System availability
Redundant power supply units, hot swappable
Redundant SATA Solid State Disk with RAID1
Windows Disk Imaging and Disaster Recovery, in the event of a system or disk crash, security attack or other fatal failure you can restore your entire controller within minutes - no reinstallation is required. .
The NPX 4800 is built in accordance with eyevis ISO 9001 registered facility to meet the specific requirements of each customer and is the best controller for standard control rooms with high availability.
Desktop management & operating system
Because of its MultiScreen-ability, any data and application can be displayed simultaneously; they can also be positioned and resized freely. The operator has a big desktop with a very high resolution at his disposal, which will be multiplied by the size of the wall.
Windows® XP PRO 32/64 BIT and WIN2008 Server support as well Windows 7 32/64Bit
Up to 16GB RAM inside the systems reserved for RAM intensive applications
Huge Windows desktop with up to 32000x32000 pixel depending on the size of the system
Standard Windows® & X11 applications (optional) and SCADA software can be displayed on the wall with no restriction.
Windows®-based applications can be displayed simultaneously with any other input signals like video, IP-video and RGB/DVI.
Bus system
The core of the system is the ultra-fast PCIe Switch Fabric with PCIe X4 slots and a total bandwidth of 192GB/s for transmitting Windows® information, network data, video, digital streams and graphic signals to each output card. This guarantees a very high bandwidth without decreasing frame rates when numerous inputs are displayed simultaneously
Input signal processing
The NPX4800 controller can be equipped with various input cards for video, RGB/DVI-HDSDI and IP signals. All input signals windows can be moved, scaled and placed freely on the display wall.
The input cards provide state-of-the-art video processing resulting in superb quality
Huge number of cards per system possible
Easy to upgrade for future system expansion
Analog Video Input Board
Up to 128 video signals in one system
Up to 32 video windows can be displayed with every display output
Composite BNC or S-Video (Y/C)
IP Decoder Board
Up to 512 video signals in one system
Simultaneous decoding of up to 32 channels in D1 resolution per IP-decoder board
Simultaneous decoding of up to 16 channels in full HD resolution per IP-decoder board
Supports MPEG2, MPEG4, H264
RGB / DVI Inputs
Display of the source output in freely moveable, scalable and placeable windows on the display wall
Up to 40 RGB/DVI input sources
Input Signals:
- DVI Single Link up to 1920x1200
- DVI Dual Link up to 2560x1600
- Analog up to 2048x1536
SDI Inputs
Display of the source output in freely moveable, scalable and placeable windows on the display wall
Up to 20 SDI inputs
Video Modes: SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p) & 2k digital cinema modes
Output graphics processing
The new 128Bit GPU has 128MB per output channel achieves a never seen graphic performance
Analog and digital outputs up to 1920x1200 pixels and HD Format
Configurations up to 48 Output channels
Multiple resolution modes for different output resolutions at the same time, for rectangle or none-rectangle display configurations*
Live preview support for each source connected with the eyecon wall management software
Underlapping mode for narrow bezel displays*
Overlapping mode for edge overlapping projections*
Pivot mode for landscape and portrait display*
*) non-standard modes, available on request
Wall management software
For an easy management of large screen displays, we recommend to combine the eyecon wall management software with the netpix controller. With this software, especially developed for large screen displays, the user has nearly unlimited possibilities for the management and operation of his display wall.
NPX4800-LC Controller Unit (Art. No. XXXXX) | |
---|---|
Processor | Intel® Core™ with 3,30GHz |
Chipset | Intel® Q67 |
RAM | 8GB DDR3 RAM (expandable up to 16GB) |
Expansion Slots | 8x PCIexpress X4 1x PCIexpress X8 |
Hard Disk | 1x 180GB, SSD (optional 2x180 GB in RAID1) |
BUS | Switch Fabric with a maximum bandwidth of 192GB/s |
Ethernet | 2x 10/100/1000 Mbps RJ45 Ports standard integrated |
Dimensions (WxHxD) | 43,0 cm x 17,7 cm x 52,3 cm |
Weight | 23kg |
Operating Conditions | Temperature: 0°C - 30°C (32°F - 86°F) / Humidity up to 3.048 m (10.000 ft) / Altitude: up to 3.048 m (10.000 ft) |
Power Supply | 100-240 V, 50-60Hz, redundant, HotSwap 620 Watt |
Operating System | Windows® XP PRO 32/64Bit Edition, Win2003+2008 Server 32/64Bit, Windows 7 32/64Bit |
Accessories (optional) | 104-key keyboard, 2-key-wheel/button-mouse, optionally with extension cable up to 50m, DVI cable für eyevis Cubes (fibreglass) for distances up to 100m |
Hardware Expansion NPX4800-EXP (Art. No. 14005) | |
Expansion Slots | 8x PCIexpress X4 1x PCIexpress X8 |
BUS | Switch Fabric with a maximum bandwidth of192GB/s |
Dimensions (WxHxD) | 43,0 cm x 17,7 cm x 52,3 cm |
Weight | 26,5 kg |
Operating Conditions | Temperature 0°C - 30°C (32°F - 86°F) / Humidity 10 - 90% not condensing / Altitude up to 3.048,0m (10.000 ft) |
Power Supply | 100-240 V, 50-60Hz, redundant HotSwap 620Watt |
Graphic Board NPX4800-GB4 (Art. No. 13986) | |
Graphic Memory | 512MB per board |
Wall Configuration | Any rectangular or non-rectangular array up to 36 display modules |
Resolution | 640x480 up to 1920x1200 and HDTV 1080p per Output |
Colour Depth | 16/32 Bit |
Output Signal | DVI-I Connector (analog and digital) optional VGA to DVI-I adapter |
Video Input Card NPX4800-VID8 (Art. No. 13983) | |
Inputs | 8 x Composite oder S-Video BNC Connectors |
Input format | NTSC, PAL, SECAM |
Decoder | High-Quality Video Decoder mit De-interlacing |
Scaling & Display | Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast. |
DVI Input Card NPX4800-DVI2 (Art. No. 16373) | |
Inputs | 2 x DVI-I / HD15 |
Signal Processing | RGB/DVI with full Refresh; integrated Scaler |
Format | RGB with separate Syncs for H and V, DVI-I |
Resolution | Up to 1920x1200 Pixels |
Pixel Format | 16Bit/32Bit, YUV422, RGB 8:8:8 |
Scaling & Display | Display of multiple sources of any size, everywhere on the video wall |
DVI Input Card NPX4800-DDVI1 (Art. No. 16329) | |
Inputs | 1 x DVI-D Dual Link |
Signal Processing | DVI with full Refresh; integrated Scaler |
Format | DVI-D |
Resolution | Up to 2560x1600 Pixels (330MHz) |
Pixel Format | 16Bit/32Bit, YUV422, RGB 8 |
Scaling & Display | Display of multiple sources of any size, everywhere on the video wall |
Video Input Card NPX4800-SDI2 (Art. No. 16242) | |
Inputs | 2 x SDI BNC Connectors with Loop-Through Capability |
Input Format | SD-SDI (480i/576i), HD-SDI (up to 1080i), 3G-SDI (up to 1080p), 2k Digital Cinema Mode |
Pixel Format | RGB 5-5-5, 5-6-5 oder 8-8-8 (24bit/ 32bit) Pixel |
Maximum SDI bit rate | 64MB per channel (total 128MB) |
Scaling & Display | Display of multiple video sources in any size, everywhere on the wall. Control of colour, brightness, contrast. |
IP Decoder NPX4800-IPD32-1 (Art. No. 18224) | |
Decoder | 32x D1 Decoder oder 16x HD 1080p Decoder |
LAN | Standard integriert 10/100/1000 Mbps RJ45 Ports |
Format | H264, MPEG2, MPEG4 |
Resolution | QCIF up to Megapixels |
Framerates | 25/30 Frames per channel |
Dimensions (WxHxD) | 48,4 x 8,9 x 50,0 cm (incl. rack handles) |
Weight | 10,5 kg |