Vsi produkti


Reference


C2-2375A

TvOne

Variable Zoom to 10X enlarges any part of the computer screen to fill the entire video screen and position controls allow movement to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colors. Temporal interpolation greatly improves frame-rate conversion by analyzing and merging successive frames. Pixel Level Motion Adaptive Diagonal Interpolation and Noise Reduction insures high quality de-interlacing of PAL, NTSC and 1080i signals. 3:2 Pull-down insures proper 24 fps film extraction from NTSC and 1080i sources.

Key Features

  • Up-Down-Cross Conversion
  • SDI inputs: 1x SD/HD/3G-SDIwith re-clocked out
  • DVI inputs: 2x DVI
  • Analog inputs: 2x CV/YC/YUV/YPbPr
  • Genlock inputs: 1x Tri/Bi with loop-through
  • SDI outputs: 2x SD/HD/3G-SDI (duplicated)
  • DVI outputs: 2x DVI
  • Analog outputs: 2x CV/YC/YUV/YPbPr
  • 2nd DVI / Analog output can be different format
  • Analog: PC to 2048x2048, HDTV to 1080p/60
  • DVI: PC to 1920x1200, HDTV to 1080p/60
  • Supports: NTSC, PAL, PAL-M, PAL-N, SECAM
  • Motion Compensation & 3:2 Pulldown
  • Temporal Interpolation & Diagonal Interpolation
  • Noise Reduction for PAL, NTSC and 1080i inputs
  • Automatic Incoming Resolution Detection
  • AutoSet - Automatic picture sizing of PC inputs
  • 4:4:4 Full bandwidth sampling
  • Video signal parameter adjustments
  • Optional redundant internal PSU
  • Audio de-embed / embed for SDI and DVI
  • Closed-caption de-embed / embed for CV / SDI
  • AFD and VP packet support for SDI
  • Integral Audio Routing
  • User-defined Logo insertion
  • Borders with variable size and colour
  • Optional Audio Module with AES break-out and adjustable delay
  • Optional Tally and Clock Modules
  • RS-232/422/485 interface
  • IP Interface
  • Variable Image Zoom to 10X and Shrink to 10%

Advanced Features

The Key Mode allows computer graphics to be keyed over an external Composite, YC, or SDI signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits Seamless Cut, Fade or Wipe transitions between input sources. The PIP Mode allows either of the computer HD15/DVI inputs to be inset in a window over any of the CV/YC/SDI video inputs or vice versa. The PIP window may be placed anywhere on the screen. The Genlock feature is SD and HD compatible and insures precise synchronization of the incoming signals by providing a wide Subcarrier lock range with Subcarrier phase adjust.

Integral Audio switching

Provided to route audio from the (HDMI-compatible) DVI input or SDI input to the DVI and SDI outputs. An optional Audio Module can provide AES I/O abilities and audio delay and can link to our A2-7300 range of audio break-out units.

Video Inputs
Television Standards NTSC, PAL, PAL-M, PAL-N, SECAM
Composite Video 2x via DVI-U or 1x via BNC b/o (note 1)
YC (S-Video) 2x via DVI-U or 1x via BNC b/o (note 1)
YUV /YPbPr 2x via DVI-U or 1x via BNC b/o (note 1)
SD/HD/3G-SDI 1x via BNC, with reclocked output
Computer Inputs
Analog 2x via DVI-U or 1x via BNC b/o (note 1)
Analog format RGBHV, RGBS, RGsB, YPbPr
DigitalDVI 2x via DVI-U (DVI-I connector)
Analog Sync  TTL Level, 10KΩ, Pos or Neg
Analog Termination 75Ω
R-G-B Level Range 0.5-2.0 Vp-p
Scan Rate Detection Automatic
Analog Signals PC to 2048x2048,HD to 1080p/60
DVI Signals PC to 1920x1200,HD to 1080p/60
Max Horiz Scan Rate 150KHz
Computer Compatibility  PC, Macintosh, Workstations
Video Outputs
Television Standards NTSC, PAL, PAL-M, PAL-N, SECAM
Impedance 75Ω
Composite Video 2x via DVI-U or 1x via BNC b/o (note 1)
YC (S-Video) 2x via DVI-U or 1x via BNC b/o (note 1)
YUV /YPbPr 2x via DVI-U or 1x via BNC b/o (note 1)
SD/HD/3G-SDI 2x via BNC (identical)
Computer Outputs
Analog 2x via DVI-U or 1x via BNC b/o (note 1)
Analog format RGBHV, RGBS, RGsB, YPbPr
R-G-B Level 0.7 Vp-p
Analog Signals PC to 2048x2048,HD to 1080p/60
DVI Signals PC to 1920x1200,HD to 1080p/60
Vertical Refresh Rate Any to 250Hz
Size and Position Automatic via AutoSet or Manual
Image Size User-Definable Presets
Image Freeze One Video Frame
Settings Memory Non-Volatile
Zoom Range Variable to 10X Zoom
Shrink Range Variable to 10% 
Image Mirroring Horizontal and/or Vertical
Conversion Technology Proprietary – CORIO®2
Frame-rate Conversion Temporal
Color Resolution 24-bit (16.8 Million Colors)
Sampling rate / type 162MHz 24-bit 4:4:4
Firmware Memory Flash, Upgradeable via RS-232
De-Interlacing
(NTSC, PAL, 1080i)
Pixel-level Motion Adaptive,
Diagonal Interpolation, Noise Reduction.
Video Comb Filter Adaptive
Film (NTSC, 1080i) 3:2 Pulldown
Video Adjustments CV/YC: Contrast, Brightness,
Saturation, Hue (NTSC).
Analog RGB/YPbPr levels
Audio support
De-embed / embed DVI & SDI
Delay / mixing Optional
Closed Captions
De-embed / embed SDI (608 & 608 in 708)
Genlock Adjustments
Subcarrier Lock Range +/- 200Hz for NTSC Operation
(+/- 250Hz for PAL Operation)
Subcarrier Phase +/- 180° Adjustment
SDI Jitter
SMPTE259M-C
(SD-SDI)
(270Mbps:525/625Line)
Jitter < 0.1 UI
SMPTE292M
(HD-SDI)
(1.485/1.4835Gbps:
720p, 1035i, 1080i, 1080p)
Jitter < 0.2 UI
SMPTE424M
(3G-SDI)
(2.97/2.967Gbps:
1080p 60/59.94)
Jitter < 0.3 UI
I/O Vertical Rates -SMPTE259M-C (SD-SDI)
525i (720x488) 59.94Hz
625i (720x576) 50 Hz
I/O Vertical Rates -SMPTE292M (HD-SDI)
720p (1280x720) 23.98, 24,25, 29.97, 30, 50,
59.94, 60Hz
1035i (1920x1035) 59.94, 60Hz
1080i (1920x1080) 50, 59.94,60Hz
1080p (1920x1080) 23.98, 24,25, 29.97, 30Hz
I/O Vertical Rates –SMPTE425M-A (3G-SDI)
1080p (1920x1080) 50, 59.94, 60Hz
Control Methods
Local via Front Panel Buttons & LCD
RS-232/422/485 via D9 Female Connector
IP Interface RJ45 Connector
Warranty
Limited Warranty 5 Years Parts and Labour
Regulatory Compliance
Main unit FCC, CE, UL, RoHS
Mechanical
Size (H-W-D) Standard 1U
Weight (Net) 4.8KG (with redundant PSU option)
Environmental
Operating Temperature 0° to +55° C
Operating Humidity 10% to 85%, Non-condensing
Storage Temperature -10° to +70° C
Storage Humidity 10% to 85%, Non-condensing
MTBF (C2-2375A-DP2) 35,000 hours 
Power Requirement
External Power Supply 110v to 240v auto-detecting
Redundancy Optional redundant internal PSU
Accessories Included 
1x Operations Manual  
1x Front Rack Ears  
1x Power cable US, UK, Euro or AU
Optional Accessories
Tally module Factory fitted (note 2)
Redundant PSU Factory fitted (note 2)
Redundant PSU + inlet Factory fitted (note 2)
Rack Support Rails(24”)  
Rack Support Rails(32”)  
Control Software Downloadable from Website
Notes
(1) BNC break-out splits the DVI-U’s analog signals into 5x BNC connectors for ease of use.
(2) Each of these uses one of the 2 spare module slots.