Vsi produkti


Reference


C2-2350A

TvOne

Variable Zoom to 10X enlarges any part of the computer screen to fill the entire video screen and position controls allow movement to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate insures crisp, clear images, while full bandwidth chroma sampling insures faithfully reproduced, high resolution colors. Motion compensation, diagonal interpolation and a 3:2 Pulldown feature for NTSC improves the image quality. Temporal interpolation greatly improves frame-rate conversion by analyzing and merging successive frames. Pixel Level Motion Adaptive Diagonal Interpolation insures high quality de-interlacing of PAL and NTSC signals.

Key Features

  • Up-Down-Cross Conversion
  • Inputs: DVI-D, YUV/YPbPr, RGB/YPbPr , CV, YC
  • Outputs: DVI-I (RGB/YPbPr/YUV), CV, YC
  • Analog: PC to 2048x2048, HDTV to 1080p/60
  • DVI: PC to 1920x1200, HDTV to 1080p/60
  • Supports: NTSC, PAL, PAL-M, PAL-N, SECAM
  • Motion Compensation & 3:2 Pulldown
  • Temporal Interpolation & Diagonal Interpolation
  • Automatic Incoming Resolution Detection
  • AutoSet - Automatic picture sizing of PC inputs
  • 4:4:4 Full bandwidth Chroma Sampling
  • Video signal parameter adjustments
  • Integral 4x1 Stereo Audio Routing Switcher
  • RS-232 and IP Interface & Windows Control Panel
  • Variable Image Zoom to 10X and Shrink to 10%
  • Genlock With Subcarrier Phase Adjustment
  • Mix, PIP, Chroma/Lumakey & Edge Blending
  • Optional Single/Dual Rackmount Kit
  • Optional Input Expansion with S2 Switchers

Advanced Features - The Key Mode allows computer graphics to be keyed over an external Composite, YC or SDI signal. The keyed image may be faded in and out. Due to the 4:4:4 sampling format, precise keying at the pixel level can be achieved. The Mix Mode permits Seamless Cut, Fade or Wipe transitions between input sources. The PIP Mode allows either of the computer inputs to be inset in a window over either of the video inputs or vice versa. The PIP window may be placed anywhere on the screen. 

Edge Blending feature

Allows feathering any or all of the edges; multiple images can be aligned vertically, horizontally, or both to create unusual displays. Using multiple units, any number of images can be blended. Gamma correction is employed to compensate for many of the problems faced when blending projectors. The Genlock feature insures precise synchronization of the incoming signals by providing a wide Subcarrier lock range with Subcarrier phase adjust.

Input Expansion

Possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit. Multiple different S2 models may be simultaneously connected to a single C2 unit.

Basic Stereo Audio switching

Accomplished by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.

Advanced Stereo Audio

Available via the optional S2-106AD Input Expansion Switcher, providing six differential audio inputs, which can be used for low impedance balanced or high impedance unbalanced sources. The user controls audio level, audio sampling frequencies and up to 999ms of adjustable audio delay independently for each input. The unit has numerous choices for audio I/O connectors, including a terminal block. The S2-106AD connects to the C2 unit via the OPTIONS interconnect cable and is then fully integrated into the control system of the host unit.

Training

There are multiple training modules for this product.

Video Inputs
Television Standards NTSC, PAL, PAL-M, PAL-N, SECAM
Composite Video 1x via BNC
YC (S-Video) 1x via 4-Pin Mini-DIN Connector
YUV /YPbPr 1x via 3-BNC 
Computer Inputs
Signal Type 1x Analog via HD15 Connector
1x DVI-D via DVI-I Connector
Format RGBHV, RGBS, RGsB, YPbPr
Sync TTL Level, 10KΩ, Pos or Neg
Termination 75Ω
R-G-B Level Range 0.5-2.0 Vp-p
Scan Rate Detection Automatic
Analog Signals PC to 2048x2048,HD to 1080p/60
DVI Signals PC to 1920x1200,HD to 1080p/60
Max Horiz Scan Rate 150KHz
Computer Compatibility PC, Macintosh, Workstations 
Video Outputs
Television Standards NTSC, PAL, PAL-M, PAL-N, SECAM
Impedance 75Ω
Composite Video 1x via BNC
YC (S-Video) 1x via 4-PIN Mini-DIN 
YUV, YPbPr 1x via DVI/RGB Conn. (shared)
Computer Outputs
Signal Type 1x DVI-I via DVI-I Connector
1x Analog RGB
      via HD-15 Connector
Format RGBHV, RGBS, RGsB, YPbPr
R-G-B Level 0.7 Vp-p
Analog Signals PC to 2048x2048,HD to 1080p/60
DVI Signals PC to 1920x1200,HD to 1080p/60
Vertical Refresh Rate Any to 250Hz
Size and Position Automatic via AutoSet or Manual
Image Size User-Definable Presets
Image Freeze One Video Frame
Settings Memory Non-Volatile
Zoom Range Variable to 10X Zoom
Shrink Range Variable to 10% 
Image Mirroring Horizontal and/or Vertical
Horizontal Filtering Full Digital
Conversion Technology Proprietary – CORIO®2
Framerate Conversion Temporal
Color Resolution 24-bit (16.8 Million Colors)
Sampling Rate 162MHz 
Digital Sampling 24-bit, 4:4:4 format
Firmware Memory Flash, Upgradeable via RS-232
Video Encoder 8-bit Digital
Video Decoder 9-bit Digital
De-Interlacing
(NTSC-PAL)
Pixel-level Motion Adaptive,
Diagonal Interpolation
Comb Filter Decoding  Adaptive
Film Mode (NTSC) 3:2 Pulldown
Video Adjustments CV/YC: Contrast, Brightness,
Saturation, Hue (NTSC).
Analog RGB/YPbPr levels
Audio Input/Output (Note 1)
Inputs 4x Unbalanced via Terminals
Output Unbalanced via Terminals
I/O Impedance Impedance-Independent
Operational Modes
Key Chromakey or Lumakey
Mix PC to/from Video
PIP Variable Window Size & Position
Genlock Adjustments
Subcarrier Lock Range  +/- 200Hz for NTSC Operation
  (+/- 250Hz for PAL Operation)
  Subcarrier Phase +/- 180° Adjustment
Control Methods
Local via Front Panel Buttons & OSD
RS-232 Interface via D9 Female Connector
IP Interface via RJ45 Connector
Infrared Remote via optional IRC-5 Remote Unit
Input Expansion Control via D-15 Options Connector
Warranty
Limited Warranty 5 Years Parts and Labor
Regulatory Compliance
Main Units FCC,CE, RoHS
Power Supplies UL, CUL, CE, PSE, GS, RoHS
Mechanical
Size (H-W-D) 41.5x218x150mm
Weight (Net) 1.30kg
Environmental
Operating Temperature  0° to +50° C
Operating Humidity 10% to 85%, Non-condensing
Storage Temperature -10° to +70° C
Storage Humidity 10% to 85%, Non-condensing
Power Requirement
External Power Supply 12VDC@1.5A (Note 2)
Accessories Included 
1x Operations Manual  
1x Power Adapter US, UK, Euro or AU
Optional Accessories
RM-220 Single/Dual Rackmount Kit
IRC-5 IR Remote Control Unit
S2 Series Input Expansion Switchers
Control Software Downloadable form Website
Notes
(1) Balanced Audio (6-inputs) and Audio Delay is available via the S2-106AD accessory. 
(2) The C2 unit uses less than 1A, however, if an S2 unit is powered via the OPTIONS connector, 1.5A is required.