Vsi produkti


Reference


EXT-DVIKVM-ELR

Gefen
How It Works
 
Place the DVIKVM ELR Sender unit next to the DVI source. Use the included DVI cable to connect the computer or other DVI source to the Sender unit. Use the supplied USB cable to connect the USB host (source) device to the USB port on the Sender unit. Connect the Receiver unit to the monitor or digital signage display with a DVI cable. Connect the USB devices to the Receiver unit. Use one Cat-5 cable, up to 330 feet (100 meters), to connect the Sender to the Receiver unit. Connect the included locking power supplies to the Sender and Receiver units, and then connect both power cords to available electrical outlets.

Note:  This product does not support HDCP content with DVI sources.
 

Optional Accessories:

 
Cat-5 Cables

 

 

 

 

 

 

 

 

 

Features
Extends DVI and USB 2.0 up to 330 feet (100 meters) over one CAT-5 cable
Supports resolutions up to 1080p and 1920 x 1200
Supports 100 Mbps using USB 2.0
Backward-compatible with USB 1.1
EDID management for rapid integration of source and display devices
Field-upgradeable via mini-USB port
Supports any Operating System (OS)
Rack-mountable
HDBaseT Certified
Locking power supplies
Rack-mountable
Specifications
Video Amplifier Bandwith: 165 MHz
Input Video Signal: 1.2V p-p
Input DDC Signal: 5V p-p (TTL)
Video Input Connector (Sender): (1) DVI-I 29-pin, female (digital only)
Video Output Connector (Receiver): (1) DVI-I 29-pin, female (digital only)
USB Host Connector (Sender): (1) USB Type B, female
USB Device Connectors (Receiver): (3) USB Type A, female
Link Connector (Sender/Receiver): (1) RJ-45, Shielded
Service Connector for Field Upgrades: USB Mini-B, female
Power Supply (Sender / Receiver): 5V DC, Locking
Power Consumption (Sender / Receiver): 10W (max.)
Dimensions: 8.5" W x 1.75" H x 4.5" D
Shipping weight: 8 lbs.