EXT-HDKVM-LAN
Video over IP for VGA, DVI and HDMI
These extenders stream video, two channel audio, microphone in/out, USB, RS-232 and IR remote control over any Gigabit Ethernet LAN. Sender and receiver connect to the LAN using CAT-5 cable up to 100 meters in lengths.
Price excl. VAT: 1.033,00 €
Price with VAT: 1.260,26 €
The HD KVM over IP extends HDMI, USB, audio, RS-232, and IR over a Gigabit Ethernet. The Sender and Receiver units can be automatically or manually configured to unique IP addresses to allow multiple Senders and Receivers to connect to the same local area network. Multiple Receiver units can simultaneously connect to any Sender unit within the network to allow wide KVM distribution. Each Receiver unit has a built-in Ethernet switch and two additional Ethernet outputs to allow other devices to connect to the network. USB 2.0 is supported in addition to backward-compatibility with USB 1.1. The Receiver unit allows the connection of up to two USB devices, providing access to printers, scanners, cameras, and external storage media in addition to the keyboard and mouse. Resolutions up to 1920 x 1200 are supported. A microphone on the Receiver unit connects to line level audio on the Audio Out (Line Out) of the Sender unit.
Package includes:
(1) HD KVM over IP - Sender (EXT-HDKVM-LANS)
(1) HD KVM over IP - Receiver (EXT-HDKVM-LANR)
(1) 2m locking HDMI cable (M-M) (CAB-HD-LCK-06MM)
(1) 2m USB cable (A-B) (CAB-USB-6)
(1) 2m RS232 Cable (CAB-DB9-6MF)
(2) Pairs, Mounting Brackets with Screws (EXT-MP-C01)
(2) 5V DC Power Supplies (EXT-PS526AIP-LP)
(1) Quick-Start Guide (QSG-HDKVM-LAN)
Features:* |
---|
Extends HDMI, USB, RS-232, bi-directional two channel analog audio, and IR over IP, using a Local Area Network |
Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) |
USB 2.0 data rates up to 480 Mbps and backward-compatibility with USB 1.1 |
EDID management for rapid integration of source and display devices |
Supports up to 16 Senders and 256 Receivers on a network |
Three-port Ethernet switch built into the Receiver unit |
Switch button on Receiver unit allows selection of multiple Senders |
Mode button on Sender for sharpness or motion optimization of image |
Field-upgradable firmware through IP |
Locking power supply connectors |
1U tall, half-rack width enclosures are rack-mountable using EXT-RACK-1U |
Wall or under-shelf mount brackets included |
Technical Specifications: |
Maximum Pixel Clock: 225 MHz |
Video Input Connector (Sender): (1) HDMI Type A 19-pin, locking |
Video Output Connector (Receiver): (1) HDMI Type A 19-pin, locking |
Line Input (Sender): (1) 3.5mm mini-stereo jack |
Line Output (Sender): (1) 3.5mm mini-stereo jack |
Line Output (Receiver): (1) 3.5mm mini-stereo jack |
Mic Input (Receiver): (1) 3.5mm mini-stereo jack |
USB Host Interface (Sender): (1) USB Type B, female |
USB Device Connectors (Receiver): (2) USB Type A, female |
RS-232 Connector (Sender): (1) DB-9, female |
RS-232 Connector (Receiver): (1) DB-9, male |
IR Emitter (Sender): (1) 3.5mm mini-mono jack |
IR Extender (Receiver): (1) 3.5mm mini-stereo jack |
Ethernet connector (Sender): (1) RJ-45, shielded |
Ethernet connectors (Receiver): (3) RJ-45, shielded |
Mode button (Sender): (1) tact-type |
ID Selector switch (Sender): (1) rotary-type |
Switch button (Receiver): (1) tact-type |
Link / Power Indicators (Sender/Receiver): (2) LED, blue |
Power Supply (Sender / Receiver): 5V DC, locking |
Power Consumption (Sender / Receiver): 10W (max.) |
Dimensions (Sender / Receiver) (W x H x D): 213mm x 43mm x 113mm |
Unit Weight: 2.3 kg |
*Features and specifications are subject to change without notice. All trademarks are the properties of their respective owners.