ADDERLink X-USB PRO
Adder's next generation USB, video and audio extender delivers sharp, bright and high resolution video images and high quality audio at distances up to 300m (1000ft) over a single CATx cable. The ADDERLink X-USB PRO has been designed to provide industry-leading video clarity, compatibility and high rack densities
Video resolutions
All resolutions up to 1920x1200 @ 60Hz, including 1600x1200, 1080p, 1680x1050.
Extension distance
200 meters using CAT5 Trunk cable
250 meters using CAT5e Trunk cable
300 meters using CAT6 Trunk cable
300 meters using CAT7 Trunk cable
200 meters using CAT7a Patch cable
Skew compensation
62ns de-skew with 2ns resolution (1/4 pixel at 1600x1200).
USB devices supported
Supports all USB 1.1 devices (full speed and low speed modes) and USB 2.0 devices that will run in low speed or full speed USB 1.1 modes.
O/S compatibility
All known software and operating systems including Windows (all), DOS, Linux, Unix, BSD, Sun OS, Solaris, Mac OS, NetWare etc.
Connectors (local computer-end unit)
1 x USB type B connector
2 x 15-pin high-density D-type female connector (blue)
2 x 3.5mm audio jack (light green)
1 x RJ45
1 x 2.5mm DC jack for optional power adapter (only required for video only applications)
Audio (end to end)
2 channel 16 bit Audio @ 44.1 KHz
THD+N typically -80dB at 1kHz
SNR typically 85dB at 1kHz
Connectors (remote console-end unit)
4 x USB type A connectors
1 x 15-pin high-density D type female connector (blue)
1 x 3.5mm audio jack (light green)
1 x RJ45
1 x 2.5mm DC jack for power adapter
Physical (Local and Remote units)
Remote -162mm x 26mm x 75mm, 430g
Local - 122mm x 26mm x 75mm, 350g
Fits into one slot width in the X-Series rack mount chassis (16 units fit into 2U of rack space)
Power supply
100 - 240VAC 50/60Hz input - 5V - 12W output
Operating temperature
0 - 40 deg C / 32 to 104 deg F
Approvals
CE, FCC class A
Optional Accessories
X-RMK-FASCIA: rack mount plate
X-RMK-CHASSIS: Rack mount chassis
PSU-IEC-5VDC-2.5A: Additional power adapter and country-specific power lead for local module (if USB powering is not possible)