All products


References


ADDERLink X-DVI PRO MS

Adder

AdderLink X-DVI PRO MultiScreen is a high performance KVM (Keyboard, Video and Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment, away from the user work station environment, whilst maintaining the same user experience. It can transmit two Single Link DVI video streams, USB 2.0 and analog audio over two CATx cables.

Hardware compatibility

All computers with DVI-D, USB and audio - requirement dependent.

DVI-D Interface – digital only

The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz per head.

USB 2.0 Low and Full speed

Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50 meters. You may need to reduce maximum cable length by 5 meters if a USB hub is connected to the receiver unit.

Audio

The system delivers analog stereo audio (Line Out).

8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).

Software compatibility

All known operating systems.

Computer connections Transmitter (TX)

2 x DVI-D, audio 3.5mm in, USB type B.

Computer connections Receiver (RX)

2 x DVI-D, audio 3.5mm out, USB type A x 4.

Physical design 

Compact case, robust metal construction 120mm / 4.7’’ (w) x 75mm / 3’’(d) x 48mm / 2’’ (h) 500g / 1.1 lb.

Power

Rx: 2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter.

Tx: Powered from two USB connections.

Optional 2.5mm DC jack (power adapter not included.

Operating temperature 

0 to 40ºC / 32 to 104ºF.

Approvals 

CE, FCC

Important extension distance details

Recommended cables are CAT7 shielded foiled twisted pairs:

Daetwyler 7702  Flexible patch cable 

Daetwyler 7120  Bulk cable

Category 5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

ADDITIONAL ACCESSORIES

X-RMK-FASCIA-Dual: Rack mount plate with screws included

X-RMK-CHASSIS: Rack mount chassis

VSCD11: HDMI to DVI cable

Standard Resolution Frequency Cable Distance
TVHD 1920 x 1080 60 Hz CAT7a 60 meters
UXGA 1600 x 1200 60 Hz CAT7a 60 meters
WUXGA 1920 x 1200 60 Hz CAT7a 60 meters
TVHD 1920 x 1080 60 Hz CAT6a 55 meters
TVHD 1920 x 1080 60 Hz CAT5e 45 meters
SXGA 1280 x 1024 60 Hz CAT7a 70 meters
SXGA 1280 x 1080 60 Hz CAT6a 65 meters
SXGA 1280 x 1080 60 Hz CAT5e 55 meters

Notes: Distances are achieved using single lengths of trunk/ bulk cable. For each break/patch connection, reduce distance by 5m. Preferably patch cables should be of type CAT7a and less than 2m. Patch cables over 2m must be CAT7a. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO MS independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.